My 1998 Ford Ranger 4×4 will not engage any ideas to what is wrong?

May 12th, 2008 by Ford Truck Part
ford 4x4
etimpane asked:


I have been having problems with my 4×4 on my 1998 Ford Ranger. It seems sometimes it will work and other times it will not. When it is not working both the 4×4 high and low lights on the dash flash on and off about 8 times and continue to do so about every 10 minutes while driving. This has happened before then just started working fine for quite some time and has recently gone bad again. Any ideas as to what the problem is?? Thanks in advance.

Is it possible to put a 351 windsor in my 1985 ford ranger 4×4? If so how much would it probably cost me?

November 1st, 2006 by Ford Truck Part
ford 4x4
Stephen asked:


im wanting to put a 351 windsor in my 1985 ford ranger 4×4 how hard would this be to do? and about how much would it cost to find and install the engine?

How do I fix a 1988 Ford Ranger 4×4 that has the jerks?

September 22nd, 2006 by Ford Truck Part
ford 4x4
Bonny asked:


It jerks after it is warmed up. I shut the key off and turn it right back on , and it will run right again for a little way, then do it all over again. It is a standard , It has a 2.9 under the hood.

what size mud tires can i get for a 1991 ford ranger 4×4 stock, that will fit without much fender mods, 15″?

August 3rd, 2001 by Ford Truck Part
ford 4x4
Patrick C asked:


I have a 1991 ford ranger reg cab 4×4 15 inch stock wheels and i want to get some new tires and i want to know if anyone has anyhting like this and what size mud tire they run that is bigger than stock but not so big it rubs bad on the fenders, (im not worried about having to trim the fenders a bit) thanks